Bill,
The Haynes manual lists 28-30 lbs. but I've never figured out how to get
a torque wrench in there. I use several extensions and if one does that
I don't think the torque readings are accurate. Use new nyloc nuts and
get them good and tight would be my suggestion, or use about half as
much force as before ;-) .
Jim Davis
Fortson, GA
Williams, Bill (Atlanta) wrote:
>Does anyone have the correct torque wrench setting for the four bolts and nuts
>that attach the half shaft to the side of the differential?
>
>Thanks,
>
>Bill
>Atlanta
>74 TR6
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
/// or try http://www.team.net/cgi-bin/majorcool
|