I agree with tightening. The transmission end may be suspect as mine was.
Crud and build up prevented full tightening. You can check if it is sound
by pushing the inner cable from the speedo end, then try to turn by hand or
with needle nose (lightly). It should not when inserted correctly and car
off. Estimate the distance from the end of the thread to the square bit on
the cable, then estimate the distance it needs to go in the speedo. This
worked for me, and it ended up being the tranny end was not snug.
Ed
Walnut, CA
72 TR6
/// triumphs@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe triumphs
///
|