triumphs
[Top] [All Lists]

Re: TR6 clutch question/problem

To: pandachadwell@mac.com
Subject: Re: TR6 clutch question/problem
From: VK0216@aol.com
Date: Fri, 9 Jun 2000 22:21:36 EDT
Cc: triumphs@autox.team.net
WELL PETE, I GOT MY TR6 BACK TONIGHT.  I HAD REPLACED ALL OF THE VARIOUS 
THINGS WE'VE DISCUSSED THE LAST WEEK AND IT RUNS BEAUTIFULLY SO FAR.   
FINALLY THE CLUTCH SHOWS NO TENDANCIES TO STICK. 
 I DECIDED TO REPLACE THE CLUTCH HOUSING, AND FORK RELEASE (BOTH USED) AS 
WELL AS THE THROW BEARING, SLEEVE, FORK PINS, CLUTCH SHAFT,  AND VARIOUS 
SEALS AND PIN AS YOU SUGGESTED.  I WAS ABLE TO GET AN EXTRA STRENGTH FORK 
PIN.  THE OLD ONE WAS SEVERELY WORN SO THAT MAY HAVE BEEN THE SOURCE OF MY 
PROBLEM.  THANKS AGAIN, YOUR HELP WAS INVALUABLE...VIRGIL....

<Prev in Thread] Current Thread [Next in Thread>
  • Re: TR6 clutch question/problem, VK0216 <=