Keith,
I always used two light coats allowed to dry and then a fairly heavy coat
on the gasket right as it went in. It works for me,
Jack Brooks
Hillsdale, NJ
1960 TR3A TS69032LO
1974 Norton 850 Commando Roadster
> -----Original Message-----
> From: owner-triumphs@autox.team.net
> [mailto:owner-triumphs@autox.team.net]On Behalf Of Keith Ehrlich
> Sent: Saturday, May 27, 2000 7:00 PM
> To: triumphs@autox.team.net
> Subject: head gasket prep
>
>
>
> Listers-
> Need an answer quickly-please respond directly as I am on digest mode...
>
> When spraying on Copper-Seal or similar products ( like silver spray
> paint) to prepare a head gasket for installation, is it proper to let it
> dry before installation or is the idea to install the gasket and torque
> down the head while the product is still tacky.
> \
> Thanks
>
>
> Keith
> TR6
>
|