These are often used for seat covering applications. I didn't use any new ones
when I recovered my dash, but I did notice that when I worked on my Jag seats,
they used a similar type of clip to hold the vinyl or leather at the edges.
"Musson, Carl" wrote:
> Does anyone know a source for the dash clips referenced below... I know I
> am going to need them, but haven't seen any reference in the usual catalogs
> or price lists.
>
> Thanks
> Carl
>
> -----Original Message-----
> From: Jim Bauder [mailto:jimbpps@pacbell.net]
> Sent: Monday, February 14, 2000 2:56 PM
> To: Dennis Lambert
> Cc: TR List
> Subject: Re: TR-3A dash recovering
>
> Also reused the original metal clips to hold the vinyl along the bottom edge
> of the dash.
--
George Richardson
Monroe, New York
The Wyvern - '57 Triumph TR3, TS15559L - http://www.merlingroupinc.com/tr3.htm
The Hippogrif - '71 Triumph Stag MKI, LE8176E - undergoing bodywork
Kitty - '83 Jaguar XJ6 Vanden Plas - Daily Driver
|