At 03:43 PM 2/10/2000 , Dave Massey wrote:
>I think you'll agree with me when I say that stiffening up a shock by
>either method will have no different effect on the shock link, the shock
>mount on the frame, the mounting bolts, even the pivot bearings.
--
I do agree, but keep the mounting bolts tight!
>
>But what it does to the insides, I don't know. But it is a very common
>modification and I haven't heard a groundswell of problems stemming from
this practice.
---
Neither have I .... but I've seen some "cores".....
Fortunately there is little danger if there's a failure.
The "little" shox (TR2,3) fare quite well and can be made very stiff.
Thanks Dave. Peter
|