triumphs
[Top] [All Lists]

RE: TR3 fan & door hinge bolts

To: "'Power British Performance Parts, Inc.'" <britcars@powerbritish.com>, Triumphs <triumphs@autox.team.net>
Subject: RE: TR3 fan & door hinge bolts
From: "Westerdale, Bob" <bwesterdale@edax.com>
Date: Thu, 18 Nov 1999 15:03:13 -0500charset="windows-1252"
RE:  1/4 X 28  5/8" long flat head screws:
        MSC cat# 67394486  box o' 100 for $ 10.98  in Zn Plated steel
pg.1399 in the big book
            Cat# 67862847  box o' 100 for $ 17.18   in Unbrako 5/32 hex key
drive p.1302
Bob W.  

-----Original Message-----
From: Power British Performance Parts, Inc.
[mailto:britcars@powerbritish.com]
Sent: Thursday, November 18, 1999 1:39 PM
To: Triumphs
Subject: Re: TR3 fan & door hinge bolts
 


Power British Performance Parts, Inc. wrote:

> JSB wrote:
>
> > Greetings,
> >
> > Any collective experience in fitting the yellow plastic radiator fans
> > supplied on many TR4/6s on TR3?  I've been told (by a fairly reliable
> > source) that these fans can be fit backwards on the TR3 giving more
effcient
> > cooling.
> >
> > Additionally, I'm havng trouble tracking down the TR3 door hinge screws.
> > None of the big three suppliers have them.  Any suggestions on an
> > alternative (cost effect) source?  Is there any "industry reconginized
> > description" of these screws?
> >
> > Thanks in advance for all advice.
> >
> > Jim Brady
> > Leawood, KS
> > 1960 TR3A
> > 1973 Stag
>
> Jim, the yellow fan will bolt up to the pulley extension on your '3, but
it has a
> recess that if fitted backward would offset the fan rearward about 1".  I
don't know
> if your source is suggesting that for clearance or for increased air flow.
The yellow
> fan blade is curved slightly along it's profile (unlike the metal TR-3/4
ones) and I
> think that reversing it's direction would create some kind of unwanted
turbulance as
> the curve would then be in the opposite direction.
>
> As for the door hinge bolts, they are 1/4-28 UNF with countersink heads.
You should
> be able to get them from any good fastener supply house or mail order from
MSC or
> McMaster-Carr.
>
> Good luck!
>
> Regards,

Sorry, I just looked them up and couldn't find them in MSC's book.  They are
in
McMaster-Carr in either slotted, phillips head, hex head, or torx head.  All
styles
available in mild and stainless steel.


Regards,

Brian Schlorff    '61 TR-4     '64 TR-4     '72 TR-6     '79 Spit
---------------------------------------------------------------------
     Power British                         Check out Power British
   1242 E. Ridge Pike                            on the 'net!
Plymouth Meeting, PA 19462
    (610) 270-0505                http://www.powerbritish.com/~britcars
---------------------------------------------------------------------


<Prev in Thread] Current Thread [Next in Thread>