triumphs
[Top] [All Lists]

Fwd: tr6 clutch low grab

To: triumphs@autox.team.net
Subject: Fwd: tr6 clutch low grab
From: CarlSereda@aol.com
Date: Mon, 19 Jul 1999 17:25:33 EDT
--part1_36144156.24c4f1cd_boundary


In a message dated 7/19/99 14:13:54, CarlSereda writes:

<<<<> I have a 1969 TR6 project that I have owned for 9 years, that I have 
just
> replaced the clutch in. While I was at it I rebuilt the Master Cylinder and
> the Slave Cylinder. Now, the problem is that when I bring my foot up off the
> floor it grabs right there.>>
ona TR4s you have to adjust the rod coming out of the clutch slave cylinder 
for .010 play by adjusting the rod nut - I wonder if yours is similar set-up 
and simply needsthat simple adjustment.
Carl
'64 TR4 since '74>>


--part1_36144156.24c4f1cd_boundary
Content-Disposition: inline

Return-path: CarlSereda@aol.com
From: CarlSereda@aol.com
Full-name: CarlSereda
Date: Mon, 19 Jul 1999 17:13:54 EDT
Subject: tr6 clutch low grab
To: triumphs@autox.team.net

<<> I have a 1969 TR6 project that I have owned for 9 years, that I have just
> replaced the clutch in. While I was at it I rebuilt the Master Cylinder and
> the Slave Cylinder. Now, the problem is that when I bring my foot up off the
> floor it grabs right there.>>
ona TR4s you have to adjust the rod coming out of the clutch slave cylinder 
for .010 play by adjusting the rod nut - I wonder if yours is similar set-up 
and simply needsthat simple adjustment.
Carl
'64 TR4 since '74

--part1_36144156.24c4f1cd_boundary--

<Prev in Thread] Current Thread [Next in Thread>