| To: | Sterrett@shenandoahautomation.com |
|---|---|
| Subject: | Re: Welding Inner Rockers |
| From: | MRobe33243@aol.com |
| Date: | Tue, 29 Jun 1999 15:49:54 EDT |
| Cc: | triumphs@autox.team.net |
Dave:
I used 1/4 inch self tapping screws to align the sill with the body and
rocker panel and to make a snug fit, I then removed the screws one at a time
and plug welded the holes, worked great also used 3M seam sealer.
Bob Roberts
TR$ 35411CT
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | GT6 rear suspension, tunabreath |
|---|---|
| Next by Date: | Re: Cracking rubber boots, Aribert_Neumann |
| Previous by Thread: | Re: Welding Inner Rockers, George Richardson |
| Next by Thread: | Cracking rubber boots, Amatruda, Andy |
| Indexes: | [Date] [Thread] [Top] [All Lists] |