triumphs
[Top] [All Lists]

re re : TR6: lowering

To: triumphs <triumphs@autox.team.net>
Subject: re re : TR6: lowering
From: "Arthur H. Smith" <arthurhsmith@compuserve.com>
Date: Fri, 19 Feb 1999 13:56:05 -0500
>Shane F. Ingate wrote:

> The blue/white competition springs from Moss will lower the car approx.
> 1.5", but I was looking to lower the car 2" or more.
> 

>Jim Hill
>If you don't mind the squeaking between the spring and the perches. You
>might be able to eliminate the noise with a very thin rubber gasket to
>replace the packing material.

in his book Herb Adams says to cut one half a coil off, then with a torch
heat the coil opposite to where it was cut. when it is red press it down
agasinst the ground to flatten it. e-mail me and i will scan and mail the
section to you.  that way you keep the original packing in the perches.

<Prev in Thread] Current Thread [Next in Thread>
  • re re : TR6: lowering, Arthur H. Smith <=