All,
Yes they are HS6, tried to do it from memory, shame on me.
Thanks for the responses, will check them out tomorrow.
Jim
At 11:57 AM 11/20/98 -0800, you wrote:
>
>On Fri, 20 Nov 1998 bjohnson@mmm.com wrote:
>
>> If the carbs are HS6 s then you should check that the Choke mechanism has
>> not stuck in the on position. It is underneath the carb on HS6s and should
>> slide IN when the choke is off. I spotted this on mine before it gave me
>> problems, so I don't know what the symptoms are !
>
>They're not stuck in the ON, but they may be maladjusted. The carbs do
>choke when I yank the button, and seem to choke 'less' when I push it back
>in. It may not be turning them all the way off though.
>
>Thanks for the reminder... today I will probably have some daylight hours
>to spend on the TR4 so I hope to have the carbs running a little better.
>
>-Malcolm
>
>
|