Re: TR4 - Engine Noise Problem Found

[Brian Kemp <bk13@earthlink.net>]

> Don't forget from previous post that the distributor is installed off one
> tooth to the counter clockwise direction.  I don't think this should effect
> timing as long as it is turned to the 7:30 position... really don't know.  I
> will correct on Saturday.

A length of coat hanger wire with a 1/8 inch bend in the end lifted up the
distributor drive gear in my TR6.  The position of the drive gear directed the
tach cable into the fuel pump, which I figure I needed to correct before the
cable broke.

Brian Kemp
72 TR6