TR3A trunnion installation question

["Alan Storey" <astorey@magni.berry.edu>]

Dear List,

A friend of mine with a 1960 TR3A is having a problem with his 
installation of new trunnions and bushings.   After he reamed the 
bushing in the lower A-arm, the bushing on one side is binding.  He 
has a clearance of about 2 thousandths between the trunnion pin and 
the bushing.  Can he ream it out another 1 thousandth to stop the 
binding?  Or is there another way to solve the problem?

Any help will be greatly appreciated.

Alan
astorey@berry.edu