To All:
I want to thank everyone for the
help they gave me on my clutch slave cylinder.
As it turned out the cylinder was mounted
on the wrong siode of the mounting plate.
So I have now rebuilt it all with some new
rubber pieces.
Also wanted to let all know that on the TR6
there is no clamp to hold the rubber end boot
on to the cylinder.
Now for my front end question:
I have a VERY pronouced simmy at 45-55 mph, and
I need to know if the wheels are not out of
balance could this be caused by the following:
Front End needs to be rebuilt????
U-Joints Bad on Drive Shaft????
If the collective wisdom is the front end rebuild
then what components are needed????
Thanks to all for the help.
Tom Wagner
72 TR 6
67 MGB(Being Painted)
|