re:Removing 1/2" hex head in MC

[Brian Kemp <bk13@earthlink.net>]

>Date: Wed, 25 Mar 1998 02:59:08 -0800
>From: Chris Prugh <prubrew@ix.netcom.com>
>Subject: Removing 1/2" hex head in MC

>What is the preferred method and or tool for removing the
>1/2" hex head retainer in my dual resevoir master cylinder?

I used a large punch or chisel with a 1/2" hex shank and a box end
wrench.  I resorted to this after being unable to locate an allen wrench
at four local stores.  Took a good bit of torque to initially break the
bit free.

Brian Kemp
72 TR6