Hi guys I always go down to my local salvage yard and pick what fan I
want mostly out of smaller cars. Then
go down to the parts store and pickup a thermostat kit
does'nt matter which kind you can also just wire in a toggle switch
and switch it off and on as needed.
Mostly if your tooling down the road you won't need it just in stop
and go. All you do is find your fan and
drill a hole in each corner and use zip ties in the holes and through
the radiator.Should have the tabs left over from the fan drill them to
and use them as support on the other side of the radiator use another
zip tie to snug the tab against the radiator then wire up accordingly.
There is a bunch of diffrent fans out there and the skys the limit.
Save half of what it would cost.
Hope this helps you all
I've done this in all kinds
of cars,trucks and such.
Allen
TR4A solid axle
MGA MK2
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
|