In a message dated 12/30/97 1:17:21, jmwagner@greenheart.com wrote:
<<Does anybody happen to have a NEW stock cork valve cover gasket handy?
I need a couple measurements off of it. I'm speaking of the stock
gasket for the TR 3 through 4A.
thank you.
Justin
>>
Justin,
I have the gasket from TRF. While I have it out, these are the principle
dimensions:
5.25" side-to-side
18.125" long
13/32" wide
3/16" thick
1 and 3/16" radius (roughly) outside corners
Hope this helps,
Bill Babbitt
TR3A in a Bag (but hopefully not for ever)
Gales Ferry, Ct.
|