Re: TR6 Trunnion Assy Question

["Robert J. Carley" <rcarley@uoguelph.ca>]

On Sat, 27 Dec 1997, Vito Pacione wrote:

> I have a question about assembling the lower trunions. I know you have to
> fill them with oil to about 25% full, but are you supposed to lubricate the
> bolt/bushings/washers that go throught the trunnion and frame brackets, or
> leave them dry?
> 
> 
When I re-assembled my TR6 front suspension, I used some Copaslip anti
seize compound (copper based) on all parts that would move or would be
dis-assembled sometime in the future.  I certainly used some on the bolt
that goes through the trunnion.

Robert Carley
Ontario, Canada