triumphs
[Top] [All Lists]

Fwd: RE: Non-LBC but my PC is used for Triump

To: "triumphs@autox.team.net" <triumphs@Autox.Team.Net>
Subject: Fwd: RE: Non-LBC but my PC is used for Triump
From: "Andrew Lindeman" <Dr_Faustus@cyber-west.com>
Date: Sat, 08 Nov 97 00:29:54 -0500
-- [ From: Dr. Faustus * EMC.Ver #2.5.02 ] --

Um, I forgot who originally had the Jaz problem.  but this is a reply
straight from an old friend at Iomega tech support.

Andy L.
------- FORWARD, Original message follows -------

Date: Thursday, 06-Nov-97 05:18 PM

From: Joe Levi                 \ Internet:    (geenz@cyber-west.com)
To:   Dr. Faustus              \ Internet:    (dr_faustus@cyber-west.com)
cc:   GuyotLeonF@aol.com       \ America On-Line: (GuyotLeonF)

Subject: RE: Non-LBC but my PC is used for Triump

The problen is that you're using an MS-DOS based OS (Windows 95/98 included)
that uses something called FAT to store data on any media (be that a 1.55 MB
floppy, a 1GB Jaz, or a 6.4 GB hard drive, or anything).

WIth this file structure (both FAT16 and FAT32) you are limited to putting
only 512 file/directory entries on the root directory (this number is cut in
half to 255 or less in Windows 95/98 because of the way 95/98 stores Long
File Names (LFNs)).

THe solution is easy, don't put ALL your files on the root. IE, if your Jaz
drive is drive J:\ and ;you store documents, music files, and pictures on it
then delete about ten files from the root of drive J:\, and make some
directories (folders) called something like J:\MUSIC>, ...documents, ...
pictures... etc... then "nest" your pictures in the pictures folder, your
music in the music folder, your documents in your documents folder.

THat way you can have about 100 (but no more than 255/512) directories on
your root, but you can put the full 1GB in those folders, or the full 1GB in
even as little as one folder of the root.

Simply put, you haven't run out of storage space, but your operating system
has run out of file entries off the root to accomodate any files that you're
trying to put on them.
 

------- FORWARD, End of original message -------



<Prev in Thread] Current Thread [Next in Thread>