A quick question for all...
My 4A's driver side door (LHD) has never fit quite right. It is reluctant
to shut fully and stands proud at the B Post. The door is not
the original, its probably a door from a 4. The B-post and sill were also
replaced at one time (DPO) due to accident damage (Hence the non-original
door). I replaced both hinges, and have tried all variations of
adjustment with hinges and striker mechanisms with no joy.
I remember reading (either on the list or someplace else) a method of
jacking the body from the frame and adding/subtracting mounting shims at
various mounting points to adjust the gap. Does anyone have wisdom with
this technique? Would replacing the striker mech have any effect?
Thanks....
---------------------------------------------------------------------------
pcarson@lcfh.demon.co.uk
Low Common Farm
Sofpars Field Service Engineer
Sanders, A Lockheed Martin Company
---------------------------------------------------------------------------
|