triumphs
[Top] [All Lists]

Engine and Head # survey

To: nickbk@aol.com
Subject: Engine and Head # survey
From: Dan Arrington <gt6nut@gnn.com>
Date: Mon, 11 Nov 1996 02:23:50 -0800
Cc: triumphs@autox.team.net
Nick,
I would be very interested in what you can tell me about these numbers.
The motor in my 69 GT-6 is definatly a transplant. It had boneyard
markings on it that said "71 TR6. But as the stroke is just under 3" it
leads me to believe that it is a 2 liter. Dont know what the stroke is
on a 2.5 but i would think it is more than that. This motor is also a
definate rebuild. The block was decked for zero clearance making the
block # kind of hard to see but still there. Had flat top pistons marked
+ 30 with four rings. Two compression and two oil rings,one above the
wrist pin and one below.

Block: KF20130U
Head:  218225

Also would be interested if you or anyone else on the list could help me
with the trans. ID. This also must have been put in later as the numbers
dont coincide with any info that i have found on GT-6's.

Trans.HC 4668107197A

What in the world did this thing come out of?
**Hope it was a TR4 or TR6** (Wishful thinking)

Seems the diff is an original so i wont pass the number on it.

Thanks in advance!

....Dan 
-- 



Dan Arrington
Near Portland,Oregon
gt6nut@gnn.com
http://members.gnn.com/gt6nut/gt6nut.htm


<Prev in Thread] Current Thread [Next in Thread>