On Sun, 2 Jun 1996, Christian Simonsen wrote:
> Haven't touched the generator. I'm going to rebuild it even if its not
> making the noise as I drive it on long trips quite often and that would be
> one less thing on my mind.
>
> Does anyone have a cross reference for the bearings so I might buy them
>locally?
>
When rebuilding my generator last summer, I found that taking it to an
alternator/starter rewind shop was the best bet. They had the bearing in
stock (same generator as used on several Ford tractor models) but more
importantly, they had the press to remove the old bearing and install the
new one. My armature and coils were OK so the whole repair cost about
$15 (Bearing was about $5 plus labor). Good luck!
Chris Sharp
'64 Spitfire4 Mk I
'96 Cannondale (Daily Driver)
|