What gearbox did you put in, Daniel?????
Brian S.
Bugeyeracer finally resto'ed!
Thanks to Frank C.!
> From: WeslakeMonza1330@aol.com
> Date: Fri, 22 Nov 2013 12:23:56 -0500
> To: spridgets@autox.team.net
> Subject: [Spridgets] Engine and gearbox back in
>
> Slow going getting the engine and new gearbox back in, not that the re-fit
> is a job I ever rush. Taking photos slowed things down but I needed them
> as this bellhousing was non-standard even for a non-standard hybrid as the
> front of this box is slightly different from the old one. I also didn't
> have any good photos of the co-ax clutch conversion. It was a pig to get
back
> in but always is since the box is bigger and heavier than the Spridget
> box. The new box does weigh about 2Kg lighter than then old box but the
> bellhousing weighed slightly more (I didn't have this one machined as much
off
> the front which is solid alloy - production change ....) Still a net
saving
> of over 1 Kg is worth having.
>
> Dinner is cooking so after that I'll be back down the garage and finish the
> install.
>
> Weslake-Monza 1330
> ------------------------
------------------------
spridgets@autox.team.net
Archive: http://www.team.net/archive
|