[Spridgets] Bugeye Rear Spring Bushing

[fogbro1@comcast.net]

List, 



After fitting a new Moss bushing to the Bugeye's rear spring, I found that it's 
a very loose fit to the pin (7/16" bolt); very unlike the original. Anyone else 
find this problem? What's the fix? Is there another source that has the correct 
part? The inner sleeve is bonded to rubber, so fixing the current bushing is 
probably not an option. 



Is there any source for the "pin", the one that passes through the bushing and 
secures the spring to the diff assembly? 



Thanks, 



Ed Woods 
------------------------

spridgets@autox.team.net


Archive: http://www.team.net/archive