spridgets
[Top] [All Lists]

Re: [Spridgets] Prop Rod location?

To: Rick Fisk <refisk@chartermi.net>, "spridgets@autox.team.net" <spridgets@autox.team.net>
Subject: Re: [Spridgets] Prop Rod location?
From: Peter Caldwell <peter@nosimport.com>
Date: Fri, 09 Aug 2013 15:09:36 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: spridgets@autox.team.net
References: <vouh0tvvn5y75okpskdrrkmy.1376077008473@email.android.com> <73DF573A-9564-4515-B26D-3C592505E799@chartermi.net>
Thank you.  I knew I didn't have to buy the book...... ;-)
      Peter C

At 02:50 PM 8/9/2013, Rick Fisk wrote:
>OK, OK, Horler says the bonnet prop was moved to the right side (looking from
>the rear of the car) with the introduction of the MkIII Sprites and MkII
>Midgets in March of 1964.
>
>Sent from my keyboard
>
>On Aug 9, 2013, at 3:36 PM, tmheffron <tmheffron@aol.com> wrote:
>
> > Correct. The right side, B as in right hand drive.B
> >
> >
> > Sent from my Galaxy SB.III
> >
> > -------- Original message --------
> > From: Peter Caldwell <peter@nosimport.com>
> > Date: 08/09/2013  1:58 PM  (GMT-06:00)
> > To: tmheffron <tmheffron@aol.com>,spridgets@autox.team.net
> > Subject: RE: [Spridgets] Prop Rod location?
> >
> > My 65 had it on the RIGHT ...ALSO!B  geesh.....
> >
> > That's the right side of the car.
> >
> > Peter C
> > At 01:45 PM 8/9/2013, tmheffron wrote:
> >> My 66 mark 3 sprite is on the left side when standing in front
> >> facing the front of the car. I use my left hand (the sinister one)
> >> to operate and place the prop rod.
> >>
> >>
> >>
> >> -------- Original message --------
> >> From: Peter Caldwell <peter@nosimport.com>
> >> Date: 08/09/2013 8:43 AM (GMT-06:00)
> >> To: spridgets@autox.team.net
> >> Subject: [Spridgets] Prop Rod location?
> >>
> >>
> >> The hood/bonnet on my newly acquired 63 Midget has the prop rod on
> >> the LEFT side of the car.B  To the best of my recollection, all of my
> >> previous cars had it on the Right side.
> >>
> >> To make the switch would require a different fender/wing and a
> >> different hood/bonnet as both have the attaching pieces welded on.
> >> There IS a part number change for the hood/bonnet early on.B  Is that why?
> >>
> >> So, perhaps a poll?B  On early square body (sorry Jay) cars with the
> >> prop rod, is yours on the left or right?B  (sounds like a tailor's
>question)
> >>
> >> It IS inconvenient to have it on the left, as when you open the
> >> hood/bonnet, and swing the rod out, it invariably gets all caught up
> >> in the throttle and choke cables.B  I'm sure that's why they moved it.
> >>
> >> B B  So, let's hear the refrainB  "According to Horler..........."
> >>
> >> Thanks for your time.
> >>
> >> Peter C
> >> ------------------------
> >>
> >> spridgets@autox.team.net
> >>
> >> Donate: http://www.team.net/donate.html
> >> Suggested annual donation: $12.75
> >>
> >> Archive: http://www.team.net/archive
> >> Forums: http://www.team.net/forums
> >> Unsubscribe/Manage:
> >> http://autox.team.net/mailman/options/spridgets/tmheffron@aol.com
> >>
> >> No virus found in this message.
> >> Checked by AVG - <http://www.avg.com>www.avg.com
> >> Version: 2013.0.3392 / Virus Database: 3211/6563 - Release Date: 08/09/13
> > ------------------------
> >
> > spridgets@autox.team.net
> >
> > Donate: http://www.team.net/donate.html
> > Suggested annual donation: $12.75
> >
> > Archive: http://www.team.net/archive
> > Forums: http://www.team.net/forums
> > Unsubscribe/Manage:
>http://autox.team.net/mailman/options/spridgets/refisk@chartermi.net
>------------------------
>
>spridgets@autox.team.net
>
>Donate: http://www.team.net/donate.html
>Suggested annual donation: $12.75
>
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage: 
>http://autox.team.net/mailman/options/spridgets/peter@nosimport.com
>
>
>-----
>No virus found in this message.
>Checked by AVG - www.avg.com
>Version: 2013.0.3392 / Virus Database: 3211/6563 - Release Date: 08/09/13
------------------------

spridgets@autox.team.net


Archive: http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>