Re: [Spridgets] Cam nut torque spec

["Jeff Kelly" <homehandy@sbcglobal.net>]

I was In the same predicament last week.  None of my manuals give a setting 
for the cam nut.  We tightened it down good using Red Lock Tight. But if you 
have a good Tab Washer (the tab fits into the keyway on the cam shaft) and 
bend it over the nut so the nut can not move, lock tight is not needed.
Jeff Kelly

-----Original Message----- 
From: Hal Faulkner
Sent: Wednesday, May 02, 2012 11:24 AM
To: Spridgets
Subject: [Spridgets] Cam nut torque spec

Can't seem to find a torque spec for the camshaft nut.  Anyone out there
got that info readily available?
Thanks,
Hal
------------------------

spridgets@autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/spridgets/homehandy@sbcglobal.net 
------------------------
spridgets@autox.team.net

Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75

Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/spridgets/mharc@autox.team.net