I've used several products and liked them both. I bought a product from
Eastwood many years ago that worked well, it was a polish and you supplied
a wool pad and sanding paper. It worked great.
Other product I used was the 3m as mentioned below, it too works well.
If you have yellowing from the inside then no system will work and you will
need to replace the housing/lens. The key is to treat the lens as you would
any thing you are sanding go in steps, take your time.
Charlie
OKC,OK
On Wed, Feb 1, 2012 at 9:10 AM, derf <derf247@gmail.com> wrote:
> Yes, but what works on some things might degrade or even ruin the
> transparency of clear plastic. You can sand/polish plastic many
> times. Depending on what spray coating you use it may or may not
> affect the longevity of the headlight. My friend with the body shop
> has access to all manner of coatings and I feel if there was some
> coating that was good for headlights then he would use it.
>
> On Wed, Feb 1, 2012 at 8:03 AM, Michael Rowe <mdrowe@optonline.net> wrote:
> >> He does not recommend spraying them with clear coat.
> >
> >
> > There are UV blockers that are not really clear coats, more like a liquid
> > film. These are used routinely on fiberglass canoes and wetsuits.
> >
> > Michael Rowe ------------------------
> ------------------------
>
> spridgets@autox.team.net
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation: $12.75
>
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/shelden3@pldi.net
------------------------
spridgets@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|