Howard,
What is the length of the springs? Original Bugeye springs should have a free
length of approximately 9.4 inches. These same springs were used for the MkII
Sprite and MkI Midget (including those with disc brakes). Stock springs for a
'73 Midget should be approximately 9.85 inches. Cars between these two should
have springs that measure 9.59 inches. All of this is according to Horler,
and my own measurements agree. :-)
Rick
Sent from my keyboard
On Jan 1, 2012, at 9:26 PM, Miniac7@aol.com wrote:
> Well I removed the Bugeye springs today and found that they are a full 2"
> longer than the ones from the '73 Midget. Does this sound like it makes any
> sense?
>
> As for the axles being kept on the side from which they were removed, it's
> too late for that. When I removed them from the Midget rear a few years
> ago, I didn't think about marking them RH or LH. I guess I can just insert
> them into the diff to see if one side feels firmer and with less play in
the
> spline then the other...no? I'm assuming it's any possible play that I
> should try to eliminate?
>
> Thank you,
> Howard
> ------------------------
------------------------
spridgets@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|