Yes indeed, the inner fulcrum pins (bolts), both front and rear on the
left hand side.
Howard
In a message dated 1/1/2012 10:07:56 P.M. Eastern Standard Time,
kevinv1275@gmail.com writes:
Howard,
Are you talking about the inner fulcrum pins? At the inboard end of
each A-arm?
If so, I have had to cut them off with a reciprocating saw on several
occasions. Heating them usually only melts the bushings and they are
still stuck to the metal portion of the bushings which will not pass
thru the holes in the A-arm. Spraying them with liberal amounts of
PB Blaster or Liquid wrench sometimes helps......
Kevin
------------------------
spridgets@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation: $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|