Bernoulli had the same problem.
http://en.wikipedia.org/wiki/Bernoulli%27s_principle
====================================
-----Original Message-----
From: spridgets-bounces at autox.team.net
[mailto:spridgets-bounces at autox.team.net] On Behalf Of miniac7 at aol.com
Sent: Wednesday, August 03, 2011 1:35 PM
To: oldsaabguy at comcast.net; kidjoevid at yahoo.com; spridgets at
autox.team.net
Subject: Re: [Spridgets] Master cylinder
I'm just totally confused by this...in one place you say....
larger cylinder = more fluid with less pressure, and in the other place you
say:
larger cylinder = less travel with more effort
You also state:
smaller cylinder = less fluid with more pressure, and in the other place you
say:
smaller cylinder = more travel with less effort
Please dumb this down even more for me so I can comprehend.
Thanks,
Howard
-----Original Message-----
From: Lester <oldsaabguy at comcast.net>
To: Joe Lansing <kidjoevid at yahoo.com>; Spridgets Group
<spridgets at autox.team.net>
Sent: Wed, Aug 3, 2011 4:01 pm
Subject: Re: [Spridgets] Master cylinder
You have two things to consider with hydraulics:
1. The volume of fluid that must be moved and
2. The pressure needed.
So...
larger cylinder means more fluid (per travel inch) but less pressure (Your
oot pressure over larger surface area = less pressure)
smaller cylinder means less fluid but more pressure
The fluid moved needs to be the distance the clutch slave cylinder needs to
ove by it's bore. This volume changes depending on which size cylinder you
ave.
So, in general, a smaller cylinder will give you more travel and require
less
ffort and a large cylinder will give you less travel and more effort.
Lester
.. see, I gave you all sorts of info that wasn't helpful! ;-)
n Aug 3, 2011, at 6:26 AM, Joe Lansing wrote:
> I can't get my Rivergate clutch slave set correctly. It really seems like
I
on't have enough throw. So my simple mind is asking - "Which master cylinder
rovides more throw? A 3/4" or a 7/8?" Did my '62 have a 3/4" of 7/8"? I
think
now have a master out of a 65...
Any guidance you can offer?
Joe
Home of the perpetual Sprite project
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
ttp://autox.team.net/mailman/options/spridgets/oldsaabguy at comcast.net
uggested annual donation $12.75
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/miniac7 at aol.com
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/corvallis at peoplepc.com
|