Hi Phil,
I went through this a couple of years ago, and contacted Revolution Wheels for
lug nuts. I deemed them too expensive and did as Herby said, drilled the holes
out to 11/16" and purchased lug nuts from Summit Racing. I actually had to buy
two sets because I couldn't get the correct size washers with the first set.
You may want to check with Revolution again, http://www.revolutionwheels.com/
John
Fogelsville, PA
--- On Sat, 7/2/11, Philip Nase <nases at verizon.net> wrote:
From: Philip Nase <nases at verizon.net>
Subject: [Spridgets] Looking for wheel bits
To: "Spridgets at autox. team. Net spridgets" <spridgets at autox.team.net>
Date: Saturday, July 2, 2011, 11:08 AM
I am planning to mount a set of revolution wheels on the bugeye. I need
sleeved lug nuts and the heavy washers and also the rigid valve stems. Where
can I find this stuff. Thanks.
Phil Nase
Quakertown, PA
http://home.comcast.net/~philnasecpa/
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/fastvee at yahoo.com
|