The last ones I had to make were from a 1gal / 5 litre plastic oil bottle.
The 'rubber' mat I would have normally used failed the dissolving in brake
fluid test.
Guy R Day
----- Original Message -----
From: "Woerpel" <dwoerpel@wi.net>
To: "MGs" <mgs@autox.team.net>; "Spridgets" <Spridgets@autox.team.net>
Sent: Wednesday, June 22, 2011 5:13 PM
Subject: [Spridgets] early master cylinder cap
> Anyone out there know of a source for the "paper" gasket that seals the
> original metal cap on the M/C of a Bugeye or MGA 1500. I have 3 caps and
> only 2 gaskets both of which are quite compressed.
> Might have to make my own, right?
>
> TIA,
> Dave W.
> 59 :{)
> 59 MGA 1500
>
> --
> Dave W.
> "Be seeing you"...at the MG Midget 50th Anniversary
> July 18-24, Elkhart Lake Wisconsin
> http://www.sprite-midgetclub.org
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/spridgets/grday@btinternet.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|