[Spridgets] brake bleeding

[an5.sprite at gmail.com (an5.sprite at gmail.com)]

I like this idea!!!
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: WeslakeMonza1330 at aol.com
Date: Tue, 10 May 2011 13:54:29 
To: <dlh2001 at comcast.net>; <an5.sprite at gmail.com>; <jessmd1 at 
comcast.net>
Cc: <spridgets at autox.team.net>
Subject: Re: [Spridgets] brake bleeding

 
Or if like me you don't have a compressor you fit a bicycle valve to a  
spare master cylinder cap and use a bicycle pump!
 
In a message dated 10/05/2011 05:03:11 GMT Daylight Time,  
dlh2001 at comcast.net writes:

One way  to "power bleed" is to find a rubber stopper that fits tightly
over the  master cylinder fill hole.  You then drill a hole in the stopper
such  that you can fit it to an air blow gun attachment.
Fire up the compressor  and set the regulator to a few psi.
Check the master fluid level often as  you proceed.

Worked for me.