Re: [Spridgets] Brakes

[an5.sprite@gmail.com]

If your clutch slave is not an OEM part I suggest taking it apart to make sure 
it is clean on the inside. Last year I purchased one from LBCC and after I had 
trouble bleeding it decided to bench bleed it first. As I was taking it off the 
piston popped out, lucky thing, as the chamber was filled with metal machine 
filings.

After cleaning it and bench bleeding it worked just fine.

Good luck,

Steve
------Original Message------
From: lindalnhvt@nhvt.net
Sender: spridgets-bounces@autox.team.net
To: spridgets
Subject: [Spridgets] Brakes
Sent: May 22, 2011 7:01 PM

Thanks for all the replies. There are numerous things I will try next
weekend when I have a day off. I'll post the results.
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/spridgets/an5.sprite@gmail.com



Sent from me.
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums