Leo,
I have tried a tumbler. Walnut shell takes for ever and get stuck in the
threads.
The pyramid shaped media works well on flat rusty and other parts.
It did round off the threads on the few bolts i put in to experiment with.
So i did not do any of the bolts i was going to use on my car.
There was enough depth left in the threads that it may not have been a
problem.
I ordered a bunch of the bolts from the UK. A friend got them and sent them.
He got them at there local store cheaper then the usual vendors sell them.
Vigil
--- On Thu, 2/17/11, Leo <60bugeye@cebridge.net> wrote:
From: Leo <60bugeye@cebridge.net>
Subject: [Spridgets] parts cleaning
To: spridgets@autox.team.net
Date: Thursday, February 17, 2011, 8:07 AM
Has anyone ever used a tumbler to clean bolts? Is there an issue that it
might "round over" the threads on the bolts and create an unsafe condition
in their usage? Or is the elctro rust removal a better solution?
Leo
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/uniquelittlecars@yahoo.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|