David,
It will fit and work, but not without modifying the lower corner of
the footwell. The way the solenoid is oriented, it will not clear the
sheet metal without cutting out a notch to make room for it. If you
don't want to do that, you need to get the type with the multi-
position bracket that allows you to rotate the solenoid into a
different positions for the application. I can supply you one of you
wish. Contact me off list if you are interested, but that type is at
least double the price.
Gerard
http://gerardsgarage.com/
On Nov 21, 2010, at 4:38 PM, spridgets-request@autox.team.net wrote:
> Message: 13
> Date: Sun, 21 Nov 2010 16:06:11 -0800
> From: David Franks <franks97@frontier.com>
> Subject: [Spridgets] Gear Reduction Starter
> To: Spridgets List <spridgets@autox.team.net>, vintage list
> <vintage-race@autox.team.net>
> Message-ID: <C90EF3F3.AD60%franks97@frontier.com>
> Content-Type: text/plain; charset="us-ascii"
>
> The Starter in my 67 Sprite finally died. Can someone tell me if
> this is the
> Isuzu starter that is supposed to work as a replacement?
>
> <http://tinyurl.com/2afnjvp>
>
> Ultima - Starter
> Part Number: 17155
> Line: ULT
>
> Does this unit fit without modification? Can I use it with my
> externally
> mounted solenoid?
>
> Thanks!
>
>
> --
> David Franks
> franks97@frontier.com
> 67 AH Sprite #82 Blue
> www.youtube.franks97
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|