spridgets
[Top] [All Lists]

Re: [Spridgets] Photo of Foam Filter

To: WeslakeMonza1330@aol.com
Subject: Re: [Spridgets] Photo of Foam Filter
From: Kirk Hargreaves <khargreaves2@gmail.com>
Date: Thu, 7 Oct 2010 10:03:52 -0700
I kind of figured about as good as nothing. .

Thanks,

Kirk

On Thu, Oct 7, 2010 at 9:43 AM, <WeslakeMonza1330@aol.com> wrote:

>  Nope, they are the worst sort of foam filters being the 'sock type'.  See
> that hole above the filter, nearest the camera viewpoint?  The carb draws in
> some air through that hole.
>
> Weslake-Monza 1330
>
> In a message dated 07/10/2010 00:23:00 GMT Daylight Time,
> khargreaves2@gmail.com writes:
>
> I remember buying them with my carb from Pierce Manifolds in Gilroy Ca.
> Pierce of course is a very reputable company, so hopefully these filters
> are
> doing at least an ok job filtering air.
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>