On 8/30/2010 2:12 PM, corvallis@peoplepc.com wrote:
> I will guess the pistons were already in poor shape when previously
> installed. I just rebuilt one of mine and those seals are near identical.
> You have to pull the old ones out and remember the order, and know to
> compare on reassembly. ...bill in corvallis
Just did this job a couple months ago. The grooved seal is on the
outside. It's responsible for retracting the piston just a bit when you
let off the brakes.
Cheers,
Dave Ambrose
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|