[Spridgets] Sprite toe-in

[Phil Nase <nases@verizon.net>]

As close as I can measure I need to add 1/8" of toe-in on my mk 1. Since
that's only a 1/16" adjustment on each side, how many turns or partial turns
of the tie rod ends do I need?  It's at about 1/16" of toe out now and is a
little darty.

Phil Nase
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums