IIRC, you might be able to change a broken stud without removing the
hub. You'll have to remove the brake disc (front) or drum (rear).
Drive broken part out (in, actually) with hammer/punch (wear eye protection).
Set new stud in hole (from rear). Use a washer and thread the lug nut
on with the flat shoulder toward the washer. Tighten lug nut until
stud seats.
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|