"Should I pound it out, or is that likely to tear and require welding?"
Michael,
I had a huge dent in the bottom front of my pan. Used a hickory
hammer handle on the metal motivated my my BFH to beat it out. The metal is
thick, so unless you're using something sharp to hammer it, you would have a
hard time putting a hole in it.
David Booker
Long Island
________________________________
From: Michael Rowe <mdrowe@optonline.net>
To:
Spridget Chat Group <spridgets@autox.team.net>
Sent: Tue, March 16, 2010
7:35:27 PM
Subject: [Spridgets] Oil pan
The oil pan I am working on now has a
dent in the bottom corner about 1/2" x 1.5".
Michael Rowe
'74 Midget
'60
Sprite kit
Long Island, NY
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/tncarnut1@yahoo.com
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|