--- On Sat, 3/6/10, Bill Masquelier <billmasq@hotmail.com> wrote:
> they are "double sealed" which I would NOT use in the back
> end of a Spridget.
> Those seals won't let oil lube/cool the raceballs.
> Go with "non-sealed" at-least.
That's the setup that racers use on double bearing hubs - sealed inner, grease
packed outer. Helps keep the axles from leaking. Spridget rear bearings are the
one thing on the car that are ridiculously over designed. Well, that and the
crankshaft nut.
Ron
_______________________________________________
Donate: http://www.team.net/donate.html
Suggested annual donation $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|