My 61 Bugeye racers spun a rod bearing while down at Texas World Speedway.
We are now in the process of rebuilding it and the tranny because it was
suffering from jumping out of first gear and had some syncro issues.
Engine is 1275 which has not be decked, bored, etc. Crank has not been turned
either.
The motor and tranny are in excellent shape.
Specifically what I am looking for is as follows:
Billet Steel Crankshaft, recommendations on what clutch set up to use, also
the same on Cam, rod and main bearings, lifters, push rods, flywheel,
pistons and what size? We are working from a bone stock core motor &
transmisson that
What has the Sprite racers done with regard to oil pan to keep oil around
the pickup point. Any windage trays or crank scrappers out there or race
modified oil pans?
I need to get on this as we are going to take the car back down to TWS for
the first race of the year which is the last week of Feb.
Thank you all in advance.
Cheers, Gary
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.75
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|