spridgets
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Spridgets] 948 piston question

from [Mark Haynes] [Permanent Link][Original]
To: spridgets@autox.team.net
Subject: Re: [Spridgets] 948 piston question
From: "Mark Haynes" <haynes386@netzero.net>
Date: Mon, 7 Dec 2009 20:14:06 GMT 
As stated, 1098 piston have a different crown height. However, 998 piston have
the same crown height as the 948 ones- you just have to bore the block by
0.062" for standard 998 pistons.


Mark Haynes
HAN6L12779
HAN5L8016

____________________________________________________________
Weight Loss Program
Best Weight Loss Program - Click Here!
http://thirdpartyoffers.netzero.net/TGL2231/c?cp=HdbKRjOpepmrH6We7OF3mAAAJz5X
oFCg_GoYpsOBXA-_r2I8AAYAAAAAAAAAAAAAAAAAAADNAAAAAAAAAAAAAAAAAAAEUgAAAAA=
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Spridgets] [9issa] Air Powered Car...For Real, Duncan Sinclair
Next by Date:  [Spridgets] mig welder, Phil Nase
Previous by Thread:  Re: [Spridgets] 948 piston question, Paul Asgeirsson
Next by Thread:  Re: [Spridgets] 948 piston question, Lester
Indexes:  [Date] [Thread] [Top] [All Lists]