This is where I get my magnetic oil drain plugs.
http://www.magneticdrainplugs.com/
After all the stupid things I've done in the past, I do not trust myself to
glue a magnet to an oily plug and put it in harms way.
Also, I put my magnetic plug in high, in the fill hole; this way I can clean
it without 'draining' my fluid. ...bill in oregon
=======================================================
-----Original Message-----
From: spridgets-bounces@autox.team.net
[mailto:spridgets-bounces@autox.team.net] On Behalf Of Paul Asgeirsson
Sent: Thursday, October 08, 2009 5:26 PM
To: Michael Rowe; David Lieb
Cc: Spridget Chat Group
Subject: Re: [Spridgets] Clutch rattle
----- Original Message -----
From: "Michael Rowe" <mdrowe@optonline.net>
To: "David Lieb" <72spridget@gmail.com>
Cc: "Spridget Chat Group" <spridgets@autox.team.net>
Sent: Thursday, October 08, 2009 4:31 PM
Subject: Re: [Spridgets] Clutch rattle
. . .
If you do find it's an OK one, make a magnetic plug using a dab of JB Weld
in the plug and a small round magnet you can get at Home Depot, They come
about a dozen in a roll you can pick up.
Paul A
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|