its kinda scary to think that is likely enough to force the to "wire" them
together.
Ryan
----- Original Message -----
From: "Frank" <spritenut@comcast.net>
To: andrewpayne@intrex.net
Cc: "Spridgets" <spridgets@autox.team.net>
Sent: Monday, September 7, 2009 6:14:00 PM GMT -05:00 US/Canada Eastern
Subject: Re: [Spridgets] Engine out!
andrewpayne@intrex.net wrote:
> With the help of a friend, the engine and gearbox came out today. A few steps
>were unnecessary, probably for other models. Our main problem came with low
>ceiling height limiting the hoist and needing the car on stands because the
>hoist was too wide and tall to fit under the wheels and suspension.
>
> I am wondering if anyone else has cable running from the right bottom
>bellhousing to the chassis near the transmission mount? I assume it is a
>torque limiting device, but I did not find it in the books while we were
>working.
>
>
That cable is on 74 models, it is supposed to keep the engine/trans with
the car in case of a severe accident.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
You are subscribed as ryan.kubanoff@comcast.net
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|