Its okay, Frank. Don't hold back. Say what you think. We can handle
it....
Cheers!!
Jim
On Thu, Sep 3, 2009 at 7:43 PM, Frank <spritenut@comcast.net> wrote:
> Last year someone decided NOT to use their moss (mainly our shit sucks)
> side mount oil filter.
> So they donated it to the Holy Sprite project.
> I tried it on the Holy Sprite and the hose interfered with the dip stick
> pretty bad so I opted not to use it.
> So I re-discovered it while looking for some engine parts in a cabinet in
> the garage and since I was whipping up a spare engine for
> the Lady Bug ('nother story) I tried this side mount filter kit from Most
> of Our Stuff is Shit. Since the 1275 dip stick is bent a little, I bent it
> more and it cleared the hose
> But it still made for adjusting the timing a bit tough.
> Anyway, last night Tiff's boy friend and I swap engines in about an hour
> (bonnet never came off the Bugeye) and before the beer break we fired it
up.
> Oil squirting out from the filter adapter like an oil well.
> Called it quits for the night and today I took it off, checked it out, no
> burrs, not loose, gasket set correct and it wasn't leaking from the hose.
> Re-install the part where they sell Mostly Oriental SUBSTANDARD SHIT, put
> in 2 more qts of oil only to have it squirt out from behind the adapter.
> I put the stock spin on set up from the first engine on the new engine and
> no more leak. But now I have 3 qts on the garage floor and all over the
nice
> new engine
> thanks to some Maggot Of a Shit Supplier.
> Tonight some one stopped by and we checked the side mount unit against the
> old engine, there is a chamfer on the bottom of this thing to clear the
> lower edge of the engine.
> Guess what? If I knew enough to FILE TO FIT like all the parts from the
> Makers Of Sheer Shit, and ground about a 1/6 off that chamfer, it would
have
> cleared the lower lip of the block.
> No instructions but from past (20 years ago) experience, I should have
> known I needed to file it to fit right.
> If the Manufacturer Of Stagnant Slop thinks I was a thorn in their side
> before.
> Just wait til the new tee shirts and buttons come out!
> And they will be "pollution resistant" unlike their excuse for quality
> rubber that goes away in a month.
> If you buy anything from Mo$$, It's your own fault. It WILL fail it it even
> works out of the box.
>
> --
> Frank Clarici
> Mo$$ SUCKS
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as bmwwxman@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
>
--
Cheers!!
Jim
Only two things are infinite, the universe and human stupidity, and I am
not
sure about the former. - Albert Einstein
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|