andrewpayne@intrex.net wrote:
> . If there is a better wheel I'd like to try before stocking up.
>
>
I use a 36 grit flap type sanding disc but not from HF.
DeWalt makes them, about $8 each but 2 will strip a Midget in a few hours.
Maybe even one, I also use them to round off or sand metal patches to fit.
Great for sanding down rust to bare metal too.
--
Frank Clarici
Toms River, NJ
My own Fleet of Sprites
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|