So they are not the air filter vent holes that allow the lighter hot air to
escape whilst the heavier cooler air is allowed into the carbs? :-)
Guy R Day
----- Original Message -----
From: <corvallis@peoplepc.com>
To: <spridgets@autox.team.net>
Sent: Friday, August 14, 2009 8:37 PM
Subject: Re: [Spridgets] "Original Sprite & Midget" by Terry Horler
> You're right, of course, unless the engine is generating water and it
> needs
> to escape as vapour (English spelling I believe.) ...bill in oregon
> ==========================================
> -----Original Message-----
> From: spridgets-bounces@autox.team.net
> [mailto:spridgets-bounces@autox.team.net] On Behalf Of Frank
> Sent: Friday, August 14, 2009 11:35 AM
> To: Dean Hedin
> Cc: Spridgets
> Subject: Re: [Spridgets] "Original Sprite & Midget" by Terry Horler
>
> Dean Hedin wrote:
>>
>> I am also curious as to any other errors that others may have
>> discovered in this book.
>
> There are a few errors.
> One of the pictures has the air filters on upside down, the drain holes
> are on top.
> I saw a Midget at a show with these holes up and pointed it out to the
> owner when he blasted me with
> quotes from Horler's book.
> Of course I could be wrong in thinking the DRAIN holes belong on the
> bottom of the filter canisters.
> All the filters I have took off had the drain holes on the bottom.
> There are a few other minor mistakes in the book that pop up from time
> to time.
>
>
> --
> Frank Clarici
> Toms River, NJ
> My own Fleet of Sprites
> _______________________________________________
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as grday@btinternet.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|