The slip ring is also available from AH Spares, 8.75 pounds.
Hal
On Tue, Aug 11, 2009 at 7:41 PM, Frank <spritenut@comcast.net> wrote:
> Jim F. wrote:
>
>> I was able to obtain a Steering column surround from Atlanta Auto Imports
>> ,
>> without the slip ring. i assume that this is the copper ring that the
>> horn
>> needs. Does anyone source this item for a BE?
>>
>>
>>
> It is brass and you could probably make one if you have a small piece of
> brass or copper will work just as well.
> You can see the outline on the plinth, and 3 spots for the bend over tabs.
> A wire with a bullet connector was soldered to it.
> I do not have one handy and am trying to remember mine when I took the
> brass ring off a cracked plinth and put it on a good plinth.
> You can get copper or brass at any craft, hobby, or quality hardware store
> in small squares.
>
>
> --
> Frank Clarici
> Toms River, NJ
> My own Fleet of Sprites
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as frog.aye@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
http://autox.team.net/mailman/listinfo/spridgets
|